Thin Saw Blades
Minimum kerf, minimum waste
Thin kerf blades for cutting where material yield matters, such as veneer, thin board and profiles. The body is tensioned so the blade still runs true at reduced plate thickness.
Applications
- Veneer
- Thin board
- Material saving
- Profile cutting
Where it is used
These tools are specified for veneer, thin board, material saving and profile cutting. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 22 standard sizes across 1 range (Thin saw blade), with diameters from Ø150 mm to Ø305 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
- Thin Saw Blades — Thin kerf circular saw blades that cut with minimal material loss, for high-volume sizing and multi-rip lines.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for thin saw blades?
Thin Saw Blades covers minimum kerf, minimum waste. Thin kerf blades for cutting where material yield matters, such as veneer, thin board and profiles. The body is tensioned so the blade still runs true at reduced plate thickness. Typical applications are veneer, thin board, material saving, profile cutting.
Which sizes and ranges are available for thin saw blades?
We publish 22 standard sizes across 1 range: Thin saw blade. Outer diameters in this range run from Ø150 mm to Ø305 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can thin saw blades be fitted to my machine?
Yes. Standard diameters in this category run from Ø150 mm to Ø305 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can thin saw blades be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Request a quotation or email jfl@jinfengli.com.