Saw Blades for Edge Banding Machines
Head and tail end trimming
Head and tail end trimming saws for automatic edge banders. Small diameter, thin kerf blades that trim the overhanging edge tape without marking the panel face.
Applications
- Edge banding machines
- End trimming
- Furniture panels
Where it is used
These tools are specified for edge banding machines, end trimming and furniture panels. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 33 standard sizes across 1 range (Edge trimming saw), with diameters from Ø90 mm to Ø150 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
- Saw Blades for Edge Trimming — Specialized edge trimming and profiling saw blades for flawless final sizing and clean edge finishing on various wood and composite panels.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for saw blades for edge banding machines?
Saw Blades for Edge Banding Machines covers head and tail end trimming. Head and tail end trimming saws for automatic edge banders. Small diameter, thin kerf blades that trim the overhanging edge tape without marking the panel face. Typical applications are edge banding machines, end trimming, furniture panels.
Which sizes and ranges are available for saw blades for edge banding machines?
We publish 33 standard sizes across 1 range: Edge trimming saw. Outer diameters in this range run from Ø90 mm to Ø150 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can saw blades for edge banding machines be fitted to my machine?
Yes. Standard diameters in this category run from Ø90 mm to Ø150 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can saw blades for edge banding machines be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Request a quotation or email jfl@jinfengli.com.