Hogging Saws for Double End Tenoners
Saw blades, hoggers and segments
Hogging saws and segmented hoggers for double end tenoners, where the first station has to remove most of the material in one pass. Segments are replaceable so a chipped tooth does not scrap the whole head.
Applications
- Double end tenoners
- Edge squaring
- Panel sizing lines
- Hogging stations
Where it is used
These tools are specified for double end tenoners, edge squaring, panel sizing lines and hogging stations. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 30 standard sizes across 2 ranges (Saw blade and hogger and Scoring saw and hogger segment), with diameters from Ø150 mm to Ø350 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
- Saw Blade and Hogger for Double End Tenoners — Main saw blades, scoring saws and hogger segments for double end tenoners, sized for edge sizing, scoring and high-volume material removal.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for hogging saws for double end tenoners?
Hogging Saws for Double End Tenoners covers saw blades, hoggers and segments. Hogging saws and segmented hoggers for double end tenoners, where the first station has to remove most of the material in one pass. Segments are replaceable so a chipped tooth does not scrap the whole head. Typical applications are double end tenoners, edge squaring, panel sizing lines, hogging stations.
Which sizes and ranges are available for hogging saws for double end tenoners?
We publish 30 standard sizes across 2 ranges: Saw blade and hogger, Scoring saw and hogger segment. Outer diameters in this range run from Ø150 mm to Ø350 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can hogging saws for double end tenoners be fitted to my machine?
Yes. Standard diameters in this category run from Ø150 mm to Ø350 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can hogging saws for double end tenoners be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Request a quotation or email jfl@jinfengli.com.