Saw Blades for Photo Frames
Mitre and profile cuts in frame stock
Blades for photo frame production, cutting mitres and profiles in MDF, softwood and plastic frame stock where the cut edge is visible and cannot be sanded afterwards.
Applications
- Photo frames
- Mitre cutting
- Frame mouldings
- MDF profiles
Where it is used
These tools are specified for photo frames, mitre cutting, frame mouldings and mdf profiles. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 9 standard sizes across 1 range (Saw blade), with diameters from Ø205 mm to Ø305 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
- Saw Blades for Photo Frames — Saw blades for mitre and profile cuts in picture-frame stock, leaving a clean, splinter-free finish.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for saw blades for photo frames?
Saw Blades for Photo Frames covers mitre and profile cuts in frame stock. Blades for photo frame production, cutting mitres and profiles in MDF, softwood and plastic frame stock where the cut edge is visible and cannot be sanded afterwards. Typical applications are photo frames, mitre cutting, frame mouldings, mdf profiles.
Which sizes and ranges are available for saw blades for photo frames?
We publish 9 standard sizes across 1 range: Saw blade. Outer diameters in this range run from Ø205 mm to Ø305 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can saw blades for photo frames be fitted to my machine?
Yes. Standard diameters in this category run from Ø205 mm to Ø305 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can saw blades for photo frames be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Request a quotation or email jfl@jinfengli.com.