Saw Blades for the Aluminium Industry
Profiles, rods and sheets
TCT blades for aluminium extrusion, rod and sheet cutting on single-head and double-head saws. Negative or low hook angles and high tooth counts keep the cut burr-free.
Applications
- Aluminium profiles
- Aluminium rods
- Aluminium sheets
- Non-ferrous metal
Where it is used
These tools are specified for aluminium profiles, aluminium rods, aluminium sheets and non-ferrous metal. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 101 standard sizes across 3 ranges (Aluminium profile, Aluminium rod and Aluminium sheet), with diameters from Ø180 mm to Ø1250 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
.webp)
.jpg)
- Saw Blades for Aluminium — Advanced carbide-tipped saw blades for efficient, burr-free cutting of aluminum profiles, extrusions, and non-ferrous metals.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for saw blades for the aluminium industry?
Saw Blades for the Aluminium Industry covers profiles, rods and sheets. TCT blades for aluminium extrusion, rod and sheet cutting on single-head and double-head saws. Negative or low hook angles and high tooth counts keep the cut burr-free. Typical applications are aluminium profiles, aluminium rods, aluminium sheets, non-ferrous metal.
Which sizes and ranges are available for saw blades for the aluminium industry?
We publish 101 standard sizes across 3 ranges: Aluminium profile, Aluminium rod, Aluminium sheet. Outer diameters in this range run from Ø180 mm to Ø1250 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can saw blades for the aluminium industry be fitted to my machine?
Yes. Standard diameters in this category run from Ø180 mm to Ø1250 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can saw blades for the aluminium industry be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Further reading
- TCT vs PCD saw blades: which one for your material? — When tungsten carbide (TCT) pays off, when diamond (PCD) is the only option, and how to compare them on cost per cut instead of unit price.
- Saw blade tooth geometry: what the letters actually mean — A plain-language key to the tooth codes printed in a catalogue — WT, AT, TT, SBL, SBR, CB, WWT and the rest — and which material each one suits.
Request a quotation or email jfl@jinfengli.com.