Saw Blades for Acrylic
Polished cuts in cast and extruded acrylic
Blades for acrylic sheet, where the cut edge has to be near-polished and free of crazing or melt marks. High tooth counts, positive rake and a thin kerf reduce heat build-up in the cut.
Applications
- Cast acrylic
- Extruded acrylic
- Signage
- Display fabrication
Where it is used
These tools are specified for cast acrylic, extruded acrylic, signage and display fabrication. Because the same nominal size can be set up differently on two machines, every enquiry is quoted against the material being cut, the machine model and the feed rate — not against a catalogue page alone.
How it is specified
The catalogue publishes 9 standard sizes across 1 range (Saw blade), with diameters from Ø205 mm to Ø305 mm. Each row is quoted as diameter (D), kerf or thickness (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable; bore, tooth count and geometry can be changed for your spindle, and sizes outside the published span are made to drawing.
Product photos
- Saw Blades for Acrylic — Melt-free, crystal-clear cutting saw blades optimized for acrylic sheets and plexiglass. Perfect, polished finish every time.
Specifications
Specification and quotation
Send the material, panel thickness and machine model, and we will confirm diameter, bore, tooth count and tooth geometry. Diameters are available from Ø80 mm up to Ø1200 mm; blades are manufactured to DIN 54 and DIN 8033 dimensions.
Frequently asked questions
What does Jinfengli manufacture for saw blades for acrylic?
Saw Blades for Acrylic covers polished cuts in cast and extruded acrylic. Blades for acrylic sheet, where the cut edge has to be near-polished and free of crazing or melt marks. High tooth counts, positive rake and a thin kerf reduce heat build-up in the cut. Typical applications are cast acrylic, extruded acrylic, signage, display fabrication.
Which sizes and ranges are available for saw blades for acrylic?
We publish 9 standard sizes across 1 range: Saw blade. Outer diameters in this range run from Ø205 mm to Ø305 mm. Every line lists diameter (D), kerf (B), bore (d), tooth count (Z) and tooth geometry (C) where applicable, and each dimension can be adjusted on quotation.
Can saw blades for acrylic be fitted to my machine?
Yes. Standard diameters in this category run from Ø205 mm to Ø305 mm. Bore, tooth count and tooth geometry are matched to your spindle and feed rate, and a size outside the published span is made to drawing. Send the machine model and the material and we confirm the specification before production.
What is the minimum order quantity and the lead time?
There is no minimum order quantity — trial batches are supported. Standard items ship from stock; custom specifications are typically delivered within one week of drawing approval. Quotations are issued EXW or FOB with taxes and fees itemised.
Can saw blades for acrylic be made to our machine or drawing?
Yes. Send the machine model, material and required diameter, bore, tooth count and geometry, and we confirm the recommended specification before production. Custom tooling is produced in our 30,000 m² plant in Heyuan, Guangdong, using DIN 54 / DIN 8033 dimensions and tier-1 European carbide.
Further reading
- TCT vs PCD saw blades: which one for your material? — When tungsten carbide (TCT) pays off, when diamond (PCD) is the only option, and how to compare them on cost per cut instead of unit price.
Request a quotation or email jfl@jinfengli.com.